Smart Talk

September 2010 - Issue 113
e-news for Flow Control Solutions

 

This Issue

Featured Product: Series 100 STANDARD Check Valves

Accurate Valves = Accurate Fuel Pressure 
for Hydroplane Racing

Acetal - A Solid Choice

Upcoming Tradeshow - Weftec in New Orleans



Featured Product: Series 100 STANDARD

Smooth Body Check Valves 

Of all 19+ valves found in the 100 Series, our standard group includes model #110, #120, #130, #140, #150, #157, #160, #170, & #174.  With a smooth body design, we’ve perfected these valves over the past 26 years for ultimate performance in low pressure, low flow devices.

For applications that require extremely small valves, #110 & #120 are an ideal choice because their seating and poppets are positioned towards one end in order to keep them at a smaller size.  Additional models are available to fit wider and/or longer spaces. 

The #150, #157, and #160 can be used individually or as the inside cartridge of our 300 Series Modular Check Valves.  The #157 is a Manual Relief Bleed Valve and is purposely designed to leak for devices that require a small amount of flow at all times.  For example, this valve is ideal for applications that run in cold weather and require steady flow to guard against line freeze.

From battery packs to dialysis machines, our Series 100 Standard Valves are versatile across every industry. These valves are very popular with customers because they are:
  • Compact
  • Cost-effective
  • Available in a wide array of body materials & O-rings
  • Easily press fit, glued in place, or mounted inside a soft tubing (with an addition of a clamp)

For samples or more information, visit us at www.smartproducts.com or call a Product & Application Specialist at (800) 338-040 today. 


Accurate Valves = Accurate Fuel Pressure 

Racing Hydroplanes Zoom Ahead with Smart Products  

Thrilling and unbelievably fast, the world of hydroplane racing is exciting, fast paced, and there is no room for error if you are in it to win it.  With this sentiment in mind, many race teams rely on Smart Products to supply quality, custom-made valves to meet their hydro needs. 

The APBA (American Powerboat Association)/U.S. Titles Series involves 14-foot hydroplanes that fly over the water’s surface on a cushion of dense air at straightaway speeds over 120 MPH.  Races are typically five lap sprints on a short, one mile oval-shaped course.   

Outboard motor racing generates well over 265 HP at 14,000 RPM out of a 700CC two stroke displacement engine, which runs on racing grade methanol alcohol and castor (or a chemical) oil mixed into the fuel, as well as an occasional dash of nitro.  A major challenge for most race teams is feeding three gallons of this type of fuel through four 38MM carburetors in less than five minutes without flooding the engine.  The flow control of fuel pressure must be accurate and precisely maintained between 2 and 3 PSI. Many of the racing teams, including 13-Time National Champion and World Speed Record Holder Liquid Courage piloted by Sean McKean, rely on Smart Products to keep their fuel pressure in line.

For the Liquid Courage racing team, the engine crankcase pumps up to 10 PSI of positive pressure generated through Smart Products’ #304/304 check valve from an oscillating pressure-vacuum.  In action, this valve opens and closes over 200 times per second!

Pressure is maintained by using another Smart Products pressure relief valve, model #118, at the fuel tank.  This valve keeps the fuel tank pressure between the prescribed 2-3 PSI.

“There is absolutely no room for error!  If either valve fails, the boat will go dead in the water and fail to finish the race.  That’s why we depend on Smart Products as our valve supplier because they make our boat run dependably and breathtakingly fast!  Racing products have to be dependable and durable to win races," says Joe Cohen of Vapor Trail Racing/the Liquid Courage Team. 

Cohen continues, "We are undefeated in Top Hydro in the U.S. Title Series this season and just recently won Top Hydro at the U.S. title race in Michigan with the overall faster time thanks to these valves.”

Smart Products designs and manufactures over 3 million flexible valve solutions for a variety of industries and applications.  For more information, visit www.smartproducts.com or call (800) 338-0404.

 


Acetal (Delrin®)

A Solid Choice for Series 100 Valves  

This month, we continue to feature body materials with Acetal (Delrin®).  Available in most 100 Series Valves, Acetal is an ideal plastic if your application requires:
  • Heat resistance between 300-400° F
  • UV Stability
  • Strength
  • Stiffness
  • Versatility with different chemicals
Overall, Acetal is a solid choice if you are looking for a compact, high-resistance valve that can withstand tough environments.  Questions? Call (800) 338-0404 or visit us online at www.smartproducts.com.   

Upcoming Tradeshows 

Weftec 2010 in New Orleans  

Visit us in-person! Speak with a Product & Application Specialist while viewing our entire product line of valves and pumps at an upcoming show 

Date: October 4-6

Time: 9:00am - 5:00pm

Location: Morial Convention Center

Booth: #7213 

http://www.weftec.org/