JACO Smart Fittings
Materials Guide Check Valve Operation View PDF Product Catalog Call now for expert technical assistance!

JACO Smart Fittings

JACO Smart Fittings save space and time by combining our own Model #132 Side Seal Valve (illustrated in green) inserted within an industry standard JACO fitting to provide precise control of air or liquids in low pressure, low flow applications.

The Model #132 valve is easily inserted to face either direction with the poppet (direction of flow) facing towards the inside or outside of the fitting. Tubing, NPT, etc. can be used on the ends of the JACO fittings according to manufacturer’s recommendations. Please note: to achieve proper function of any valve and fitting pairings, compression nuts should be used in all applications. 

JACO Smart Fittings are available in polypropylene; however, PVDF (Kynar) is also available as a custom order.

J00

Model #J00 Male Connector - 3/8" Tubing x 1/4" NPT

J02

Model #J02 Union - 3/8" x 3/8" Tubing

J04

Model #J04 Female Connector - 3/8" Tubing x 1/2" NPT

J06

Model #J06 Female Elbow - 3/8" Tubing x 1/4" NPT

J08

Model #J08 Branch Tee - 3/8" Tubing x 1/4" NPT

J10

Model #J10 Union Tee - 3" x 3/8" Tubing

J01

Model #J01 Reducing Union - 3/8" x 1/4" Tubing

J03

Model #J03 Female Connector - 3/8" Tubing x 1/4" NPT

J05

Model #J05 Male Elbow - 3/8" Tubing x 1/4" NPT

J07

Model #J07 Union Elbow - 3/8" Tubing

J09

Model #J09 Union Tee - 5/8" x 5/8" Tubing

J11

Model #J11 Male Run Tee - 3/8" x 3/8" x 1/4" NPT


Note: Dimensions on this page are based on Polypropylene material. These are typically held to a +/- 0.005" tolerance. Keep in mind different plastics have different shrink rates and may vary from these tolerances.

Our products are subject to continuous improvement. To achieve this goal, Smart Products reserves the right to change features, processes, materials, testing and other specifications as necessary. All plastic body material recommendations are based on standard corrosion resistant and compatibility guides. Smart Products strongly recommends that customers test products for each application-specific use.

Buyer is urged to test and investigate the compatibility of any substance used with our products prior to actual use. Seller will not be responsible for the failure of Buyer to thoroughly test and investigate the compatibility of the substances used with our products and the fitness of the products for its particular use or application.

VALVES

Series 100 Cartridge

Series 100 Specialty
Series 200 NPT
Series 300 Modular
Series 500 Miniature

JACO SMART FITTINGS
PUMPS

Liquid Pumps
Air Pumps
Micro Air Pumps
Liquid Pumps Specs PDF
Air Pumps Specs PDF
TECHNICAL

FAQs
Check Valve Operation
Plastics Guide
O-rings Guide
Conversion Charts PDF

MARKETS

Automotive
Chemical Processing
Food & Beverage
Industrial
Medical
Pool & Spa
Water Treatment

Others
NEWS

Newsletters
Press Releases
Tradeshows
Charitable Contributions


CATALOG PDF
ABOUT

Contact Us
Terms & Conditions




Smart Products, Inc. · 675 Jarvis Drive · Morgan Hill, CA 95037 USA · Call Toll Free – (800) 338-0404